Had to cut in 7 pairs of Sonance Visual Performance VP65R XT in-ceiling speakers today. For an outdoor exposed porch over hang. Apx 1-1/4″ of wood. Plywood with bead board on top. it was already painted so i had to be super careful. I decided to use a router to cut the holes. The problem was creating a template for the router. I am out of town with a limited set of tools. I wasn’t getting any love from the other trades so i had to make my own jig. Found a real hardware store that had a giant Starrett 8-1/4″, $145 (ouch) hole saw in stock. Exactly the size i needed. They also had Veto Pro pac tool bags in stock. First time i have seen them for sale at any hardware store. When i saw them in the window i knew i found a serious hardware store.

Creating the template in 3/4″ plywood went well. Managing a hole saw that big is no joke if it gets away from you. At one point i had the idea to cut the speakers out with it but theres no way i could have done it. I attached my template to the ceiling and ran the router around cutting perfect circles for every speaker. The sonance speakers went in effortlessly. Sonance has always had their act together in terms of getting them installed but these Visual Performance speakers are crazy. The cover is magnetic and snaps right in place. One pain with previous models was that if you over tightened the screws your bezel would be distorted making it difficult to get the grill in. That problem has been officially resolved.

There is one last thing i would like them to address (and finally reach in-celing/in-wall speaker nirvana) and thats the spring loaded speaker cable terminals. I wish they would design them so you get a little pig tail that you connect to your speaker wire that then plugs firmly into the speaker as your putting it in the ceiling. The spring loaded terminals are fine but i hate trying to hold the speaker and push them in 1 by 1. It would be nice to have an easy “jack” to connect.

Back on topic :)… The crazy awesome giant hole saw…